來源:http://www.kangyanghua.com/ 發布時間:2022-07-09
噴砂角鋁可以作為型材使用也可以作為加工件使用,不管是哪種使用方式,都要進行加工之后才能進行安裝工作。噴砂角鋁的加工方式和常用的鋁型材一樣,可以進行切割,也可以進行打孔攻牙,甚至可以進行雕刻定制。下面就來給大家具體的講解一下。
Sandblasting angular aluminum can be used as profiles or machined parts. No matter which way of use, it can only be installed after processing. The processing method of sandblasting angular aluminum is the same as that of commonly used aluminum profiles, which can be cut, punched, tapped, or even carved and customized. Now let's give you a specific explanation.
噴砂角鋁加工件
Sandblasting angular aluminum machined parts
噴砂角鋁型材一根是6米長,但是用到一整根的情況很少,都是按照需求進行切割加工的。這個時候就會用到切割技術,根據客戶使用要求進行尺寸切割,在切割上面類型上還可以滿足不同角度切割要求。
One sandblasting angle aluminum profile is 6 meters long, but it is rarely used as a whole, and it is cut and processed according to requirements. At this time, the cutting technology will be used. The size cutting will be carried out according to the customer's use requirements, and the cutting type can also meet the cutting requirements of different angles.
但噴砂角鋁加工成角件,就會用到攻絲技術,在加工角件上打孔攻絲,并于各種型材或者型材與板材之間的連接工作。就像下圖中的工作臺,工作臺臺面與型材之間固定就會用到攻絲這樣的加工方式,噴砂角鋁加工件另一邊與臺面連接處就直接攻絲使用平機螺栓擰緊。
However, when sandblasting angular aluminum is processed into angular parts, tapping technology will be used to drill holes and tap on the processed angular parts, and work on the connection between various profiles or profiles and plates. Just like the worktable in the figure below, tapping is used to fix the worktable top and the profile. The other side of the sand blasting angular aluminum workpiece is directly tapped and tightened with flat machine bolts.
噴砂角鋁切割
Sand blasting angular aluminum cutting
噴砂角鋁型材上還可以打通孔,依然拿工作臺這個為例給大家介紹一下,噴砂角鋁上面沒有孔,在需要使用配件的位置,打上通孔,方便螺栓直接穿過與型材連接。
Through holes can also be drilled on the sandblasting angle aluminum profile. Take the workbench as an example to introduce to you. There are no holes on the sandblasting angle aluminum profile. Punch through holes at the positions where accessories need to be used, so as to facilitate the bolts to directly pass through and connect with the profile.
噴砂角鋁屬于鋁型材系列,但是它可以加工成角支架作為配件使用。噴砂角鋁一根的長度是6米,可以根據客戶需求進行定制加工。那么在加工過程中需要注意哪些呢?
Sandblasting angle aluminum belongs to the aluminum profile series, but it can be processed into angle brackets as accessories. The length of one piece of sand blasting angle aluminum is 6 meters, which can be customized according to customer needs. So what should we pay attention to in the processing process? The following editor will explain it to you in detail.
此外鋁板生產廠家提醒您,實際上噴砂角鋁有多種型號,它的材質為6063-T5,在加工過程中也是需要根據對應的型材來選擇相對應的噴砂角鋁加工角件。一般噴砂角鋁加工需要注意的點有兩項:
In addition, the aluminum plate manufacturer reminds you that in fact, there are many types of sandblasting angular aluminum, and its material is 6063-T5. In the processing process, you also need to select the corresponding sandblasting angular aluminum processing angular parts according to the corresponding profiles. There are two points that should be paid attention to in general sand blasting angular aluminum processing:
一是噴砂角鋁在切割的時候,要按照客戶需要的尺寸來切割,切割端面要齊平,端面不能出現鋁削,這項注意事項和使用的加工設備有關,以及刀具的質量有關,這點在購買的時候可以和商家先了解。
First, when cutting sand blasting angular aluminum, it should be cut according to the size required by the customer. The cutting end face should be flush, and there should be no aluminum chipping on the end face. This attention is related to the processing equipment used, as well as the quality of the cutting tools, which can be understood with the merchants when purchasing.
二是在切割好的噴砂角鋁上面打孔,選擇什么系列型材就要選擇相對應的噴砂角鋁。在切割好的配件上面定位打孔,這孔的位置不能偏移。
The second is to punch holes in the cut sandblasting angle aluminum. The corresponding sandblasting angle aluminum should be selected for the selected series of profiles. Position and punch holes on the cut accessories, and the position of the holes cannot be offset.
以上就是今天為大家介紹的關于問題以及注意事項的全部?jī)?nèi)容,希望對大家能有所幫助,想要了解更多內容可以電話聯系我們或者關注我們的網站http://www.kangyanghua.com,我們的工作人員會及時與您取得聯系。
The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.kangyanghua.com , our staff will contact you in time.